| RWO-Plus-HGP
Firmware Release Notes: |
- 2006-02-27
Version 3.27R
- Fixed
bug in PtP Bridge mode with enabled Packet Aggregation not
working properly.
- 2006-02-20
Version 3.26R
- Added
support for channels with 5MHz and 10MHz width.
- Added
user selectable Ethernet port speed.
- Fixed
bug with encryption not working properly.
- Fixed
bug where device operating as bridge in AP Client/Infrastructure
Client would forward incorrect traffic to the ethernet port.
-
2005-12-14
Version 3.24R
- Even
more Improved Performance
- Added
Packet Aggregation for PtP Bridge mode so now devices are
capable of forwarding more than 8000 packets per second
-
2005-11-06
Version 3.21R
- Please
note: After upgrade to the 3.21R firmware from the prior
version, first time after reboot it will take approximately
5 minutes for the device to fully boot up. This behaviour
is expected.
- Improved
Performance.
- Fixed
Firewall option, which did not always filter the traffic
correctly as specified in the defined rule.
- Added
Port Forwarding Option (NAT Router mode only).
-
2005-10-21
Version 3.07R:
- Added
Point to Point bridge mode where two HP4A devices can be
connected together and bridge ethernet network segments
(full MAC address passthrough is supported). It is necessary
to configure "Preferred BSSID" option for this
mode to work.
-
2005-10-01
Version 3.06R
- 3.xx
is a completely new firmware family for RWO-Plus-HP4A devices
which has been rewritten from the scratch.
|
|
