| RWO-Plus
Firmware Release Notes: |
- 2004-10-01
Version 2.08b1
- Fixed
error in firewall module
- Greatly
improved device startup time
- 2004-10-27
Version 2.09
- Fixed
random device reboots
- Added
Router NAT mode (the device performs IP NAT from ethernet
to wireless lan interface)
- Added
Signal Strength and Signal Quality reading for associated
stations in Access Point mode
- Added
Signal Strength and Signal Quality reading for AP while operating
as Access Point Client
- Added
Received/Transmitted bytes counters for associated stations
in Access Point mode
- Added
Received/Transmitted bytes counters while operating as Access
Point Client
- 2004-10-29
Version 2.09b1
- We hope
we have fixed the 'login' problem, where you had to press
submit button twice or more times, in order to log into the
device.
- PPPoE
passthrough in bridge mode should be working again now.
- 2004-11-13
Version 2.10R
- Improved
WWW server performance
- 2004-11-13
Version 2.13R
- Fixed
WWW server crash in AP mode while many stations are active
on the Access Point
- 2005-02-16
Version 2.16R
- Fixed
problem with QOS where non explicitly defined stations would
get very small amount of traffic
- Fixed
problem with Site Survey stalling in APC mode when there's
no connection to the Access Point
- Fixed
firewall filters in router/NAT mode, where not all defined
rules would work
- Added
SNMP support (MIB file included)
- Added
user 'guest' (with initial password 'public') with privileges
to display device status only (no configuration allowed)
- 2005-03-15
Version 2.18R
- Fixed
problem with DHCP server not offering leases after few hours
of work
- Added
WDS support (WDS only works in IP bridge mode)
- Added
PPPoE support so the RWO device can now log itself into PPPoE
concentrator/server
- Added
Reset to Default Settings button in the Service Tab
- Added
support for RWO-Plus-HP boards
- 2005-06-15
Version 2.18R3
- Fixed
problem PPPoE and NAT working in corecly in client mode
- Fixed issue with
SNMP service stoping
|
|
