IPNPSG-II V1.09.XX Release Note
  • V1.09.02 Fixed Bugs:
    • LAN Device status show fail issue
    • Very low throughput problem
    • System reboot problem! (may caused by throughput test).
    • Weird character issue.
  • V1.09.01Fixed Bugs:
    • The expire time "1 day" is not work.
    • Bandwidth management problem.
    • Public service can't work in scenario A port location mode
    • New Modification:
      • The DUT connect AG-200E, not AG-200
IPNPSG-II V1.08.XX Release Note
  • V1.08.07 Fixed Bugs:
    • subscriber do frame login will cause system reboot.
  • V1.08.06 Fixed Bugs:
    • Wan PPPOE mode can't connect problem.
  • V1.08.05 Fixed Bugs:
    • Web server cannot browser.
    • Web Server crash issue.
    • Account will lost on PMS transaction.
    • VPN issue.
  • V1.08.04 Fixed Bugs:
    • Checkout message issue for PMS.
    • Enable the accounting service problem.
  • V1.08.03 Fixed Bugs:
    • When the DUT reboot, the acct-session-id of RADIUS will change.
    • The DUT don't sent the Revenue Code and Description to PMS although it shows correctly on PMS Transaction
    • When client login on RADIUS mode, it login pass that the authentication request is ok but accounting start is fail.
  • V1.08.02 Fixed Bugs:
    • Dynamic account list problem.
    • Know Bug:
      • Static Account charge again issue.
  • V1.08.01 Fixed Bugs:
    • ISS4000 LAN Device Issues.
    • Internet Server Fidelio interface problems.
    • WEB server hang.
    • Static Account disappear issue.
    • File transfer failed while using Windows Neighbourhood.
    • ICMP attack will crash DUT.
IPNPSG-II V1.07.XX Release Note
  • V1.07.07 Fixed Bugs:
    • When enable the value of the "Number of copies to print" to 2, printer will printout the tickets with wrong format
    • Scenario C billing default mode change to accumulation
  • V1.07.06 Fixed Bugs:
    • Admin click apply on Restart page that the DUT will be hang for LAN ip is not 10.59.1.1
  • V1.07.05 Fixed Bugs:
    • Walled Garden Function does not work properly.
    • Static account expiration time error.
    • Session list show wrong VLAN ID message in scenario A mode.
    • New Modification:
      • Modify IP&P issue
  • V1.07.04 Fixed Bugs:
    • NTP Time Server issue
  • V1.07.03 Fixed Bugs:
    • PMS Transaction Log UI issue
    • Console action becomes much slower
  • V1.07.02 Fixed Bugs:
    • IP Filtering Function and LAN Device Function issues
    • Static Account print out error.
    • Warning/Alarm message can not enable.
    • Scenario Guide UI issue.
    • Idle Time Out Function can not work properly Accumulation Mode.
    • Credit Card user changes to Dynamic user.
    • Scenario C has PMS Transation Log.
    • Current User List page shows wrong Billing Profile for Static Account.
  • V1.07.01 Fixed Bugs:
    • Expired Time confused.
    • New Feature:
      • Add IP Filtering setting on Advanced Setting.
      • Add Accumulation billing mode for static and Dynamic account on Scenario Guide
      • Add Expire message setting on Account Printout Customization
      • Add Remaining Time item on Static and Dynamic Account List
    • Note:
      • IP Filter is high priority than Passthrough
IPNPSG-II V1.02.03 Release Note
  • Fixed Bugs:
    • Server setup page can't work
    • Public pool and static IP IPNPSG-II issue.
IPNPSG-II V1.02.02 Release Note
  • Fixed Bugs:
    • Dynamic account duplicate
  • New Modifications:
    • Fake IP IPNPSG-II issue:
      • Only if DNS server responds a DNS error message, the IPNPSG II will reply the fake ip to subscribers
    • Back up Mechanism:
      • Add the mechanism of event to back up net user and account.
      • IPNPG-II doesn't send to NAS-Reboot to RADIUS while system booting.
    • Remove "Only for built-in Authenticate" of description on Web UI.
  • New Feature:
    • Billing log add account status "In-Use, Un-used, deleted, finished, expired"
    • Open configuration for RADIUS authenticate retry time. (Max. 75 seconds)
IPNPSG-II V1.02.01 Release Note
  • New Modifications:
    • Micros Fidelio:
      • Remove "RO" in GC function.
      • Send a "LS" first before send a "LA"
IPNPSG-II V1.01.06 Release Note
  • Fixed Bugs:
    • Built-in/RADIUS Combo authentications
    • Proxy private user can't get redirect to dest. url , user get a public notice page
IPNPSG-II V1.01.05 Release Note
  • Fixed Bugs:
    • Proxy IP as same as LAN IP subnet.
    • iPAQ HP4150 compatible IPNPSG-II issue:
      • DHCP server doesn't send the code of "End Option" in the packet while the DHCP packet size over 300.
    • LAN subnet with WAN DNS problem.
    • Proxy function can't work completely with no authentication.
    • Dynamic Account List error
    • Will regenerate password of static account without room checked out via MKII PMS interface.
  • New Feature:
    • Support printer.
    • Add Universal PMS Interface.
    • Add DHCP Public / Private Pool.
    • Add Built-in/RADIUS Combo authentications.
IPNPSG-II V1.01.04 Release Note
  • Fixed Bugs:
    • The restore function of Accounting and port-location mapping.
IPNPSG-II V1.01.03 Release Note
  • Fixed Bugs:
    • DUT will reboot with bandwidth function enabled.
    • DHCP server doesn't send the code of "End Option" in the packet while the DHCP packet size over 300.
IPNPSG-II V1.01.02 Release Note
  • Fixed Bugs:
    • The user can not input #51 LAN device record in the second page of "LAN device management".
    • After PMS reboot, PMS will not receive post charge from IPNPSG-II except reboot IPNPSG-II.
    • Vendor-Specific Attribute IPNPSG-II issue.
    • Console port setting will cause the console ui disorder
    • Console configuration IPNPSG-II issue.
    • Udp fragmentation packet cause the dut networking hang
    • System Up time is different between syslog message and SNMP query result.
    • The restore function of Accounting and port-location mapping.
IPNPSG-II V1.01.01 Release Note
  • Fixed Bugs:
    • Re-add PMS interface error message print-out for manufacturing testing.
    • Save console port settings for boot code to make the message display correctly when system reboots.
IPNPSG-II V1.00.20 Release Note
  • Fixed Bugs:
    • System Hang problem
    • Radius interim lacks of session time attribute.
IPNPSG-II V1.00.19 Release Note
  • Fixed Bugs:
    • When we change the SSL Login security to disable mode, the GIS client can't login to system.
    • In the firmware version 1.00.18, the login mode of IPASS Ready only the Directly Reply can work properly. When we change to other mode, the GIS client can't login to system.
    • Lack of octet-in, octet-out, packet-in, packet-out radius attributes.
IPNPSG-II V1.00.18 Release Note
  • Fixed Bugs:
    • Print out the static accounts with "none" billing profile, the DUT respond a error message "Invalid Accounting Billing Profile "
    • Use to print out the accounts we find out the size of tickets are becoming smaller than usual one.
    • A client under the LAN port of DUT tries to login system with correct username and password, after press the enter button the DUT will reboot. When the authentication mode is in RADIUS mode.
IPNPSG-II V1.00.17 Release Note
  • Fixed Bugs:
    • DUT add the new function for IPASS Ready. But the attributes of RADIUS don't meet the IPASS READY Spec.
    • Routing records can not delete after system restart.
    • Set up all the column in Location Information with max characters, after system restart, we ping from LAN and WAN are fail also the console can not show anything.
    • Create a static/dynamic account, PC1 use this account to login the system, PC2 connect to PS80(PMS enable) under DUT, PC2 login to WEB UI, apply the disconnect all button in current user list, we find out at the same time the syslog send two subscriber tracer syslog, one is the PC1 the other is PC2 but PC2 never login the system.
    • Print out the static accounts with "none" billing profile, the DUT respond a error message "Invalid Accounting Billing Profile ".
    • In standard login page, we can not modify the characters in copyright column.
IPNPSG-II V1.00.16 Release Note
  • Fixed Bugs:
    • After firmware upgrade to 1.00.15, when we set up the DUT then apply the setting, after system
      restart, all the configuration will back to default setting.
  • New Feature:
    • Add static route functions.
    • Add iPass Ready function.
IPNPSG-II V1.00.15 Release Note
  • New Modification:
    • Change method for erasing configuration database. If version of database is older than current version, we will erase the database.

 
Online Store- Office: 207-667-7583/8643/7624/4650 | efax: 207-433-1008