Reliawave™ 802.11b RWR Plus Outdoor CPE/AP/Bridge/Router With 10dBi Integrated Antenna

The Reliawave RWR Plus is a 2.4 GHz 802.11b compatible client bridge/route this is completely integrated in to a 10dBi antenna delivering 28dBm EIRP or 650mWs EIRP of power! The extremely small 6"x6" 10dBi integrated antennas comply with FCC standards. Designed with ease of installation in mind, RWR Plus simplifies subscriber installation with its Integrated Antenna, Power over Ethernet (PoE), 'Plug and Play' installation and enhanced list software capability. Housed in a weatherproof enclosure, the RWR Plus is built to operate in outdoor environments. This device can be installed on the building exterior as well as indoors. RWR Plus Plus delivers reliable performance withstanding temperatures between -5C ~ +60C. The self-contained RWR Plus Plus unit can be mounted on a pole or wall. With the included POE the RWR Plus is powered over the standard Ethernet CAT 5 cable. It works with all WiFi™ compatible IEEE 802.11b Access Points and eliminates complicated client installations and driver conflicts with various OS. The RWR Plus delivers outstanding network availability and end-to-end system throughput. Perfect for applications requiring high bandwidth at a fraction of the cost of T1/E1 leased-line, with the additional advantage of zero monthly recurring cost from the service carrier. Typical usages include bridging satellite offices, corporate LANs, school campus, as well as wireless Internet services, at distances up to 2+ miles (Link Budget Calculator). The Reliawave RWR Plus is also the solution of choice for bridging networks that are impossible to connect using wired alternatives, including networks separated by difficult terrain, railroads, or bodies of water.

Features at a glance
- Integrated 10dBi antenna, rugged weatherproof design in a compact 6"x6" stylish enclosure
- Ideal for wireless LAN access in all indoor and outdoor areas.
- Flexible mounting on wall or antenna mast (up to 1.5 inch diameter)
- Can be mounted for Horizontal or Vertical Polarities
- Powered through Ethernet cable using PoE injector
- 1 x 10Mb ports
- Works with all Operating Systems
- Auto Fall back data rate for long distance communication in noisy environments
- High level security with full 64/128Bit WEP, WPA Encryption (TKIP/AES) and 802.1x
- RTS/CTS - Fragmentation Control
- ACK Timeout Support
- AP Client, AP Client Router, AP Router, AP Bridge, Ad Hoc, WDS
- Short and Long Preamble Support
- IP Alias (5 LAN, 5 WAN)
- PPPoE Client
- DHCP Server and Client
- NAT Router
- Bi-Directional Traffic Shaping via IP or MAC
- Firewall (Port, IP MAC Filtering) / Port Forwarding / DMS
- Watchdog Timer
- Wireless Site Survey
- Web base Management System
- Compatible with IEEE 802.11b & IEEE 802.3 standards.
- Firmware can be remotely upgraded