|
| Reliawave™
RWA 3000 Dual 2.4Ghz/ 4.9Ghz / 5Ghz
802.11a/b/g Outdoor AP/Router/Hotspot Controller |
RWA 3440 Shown
|
|
|
|
The Reliawave
RWA 3000 product line is a wireless network-in-box solution designed
to enable the immediate deployment of profitable public and/or
cost-effective private WLAN networks by service providers and
enterprises. Designed for outdoor deployment, the RWA 3000 can
be used for traditional fixed wireless deployments, using a CPE
device, or to send signals into buildings from the outside allowing
for simple to manage mobile/hotspot solutions! It integrates wireless
access and back haul in to a single simple to install solutions.
This cellular architecture simplifies WLAN infrastructures and
eliminates crippling T1 and DSL back haul costs, which have so
far stifled the deployment of economical, medium- and large-scale
public WLAN networks.
| BENEFITS: |
|
| •
Eliminates the need for cables, extra switches and routers
to interconnect wireless nodes. |
•
Reduces WLAN operating expenditures by up to 90%. |
| •
Requires ten to twenty times fewer access points compared
to indoor solutions. |
•
Eliminates T1, DSL and other back haul costs. |
| •
Eliminates disruptive, in-building network deployment. |
•
Reduces WLAN capital expenditures by up to 70%. |
| |
|
| APPLICATION: |
|
| •
High speed fixed wireless up to 25 mile radius (WISP) |
•
Apartment buildings |
| •
Hot spots, such as coffee shops, book stores, office buildings |
•
Campuses |
| •
Complex shaped buildings |
• Buildings where it is difficult to add cables |
| •
Corporate offices, manufacturing centers, universities, hospitals,
research parks,municipal centers |
•
Hot zones such as business districts, office parks, airports,
hotels, conference centers, recreation areas, and shopping
malls |
To enable unparalleled deployment flexibility the RWA 3000 product
line is a compact, environmentally hardened outdoor package that
allows for a variety of mounting options. It can be mounted on any
type of pole or readily attached to the side or roof of a building.
Installation can be completed by one person, in one trip, there
are no extra switches, routers or cables required to connect multiple
RWA 3000's. The 2.4Ghz 4.9Ghz or 5Ghz backbone provides carrier-class
network level redundancy to ensure service availability without
operator intervention. It also makes interconnecting the RWA 3000
platforms much simpler and more cost-effective than conventional
architectures. Salability and reliability are enhanced because the
cellular LAN supports multiple, full duplex, Fast Ethernet exit
points. In addition, wireless static or dynamic routing with load
balancing using RIP with alternate paths are used to enhance system
availability and provide a self-healing routing network.The true
value of the RWA 3000's is its ability to enable the deployment
of medium and large-scale WLAN/MAN's that make business sense. By
integrating the access radio and the interconnection network between
access points into a single, compact, outdoor package, the RWA 3000's
dramatically reduces capital and operating expenses. It goes beyond
basic WiFi to provide low-cost, mobile networking without limits
for service providers, enterprises, and users. |
|
Reliawave™
RWA 3000 2.4Ghz/ 4.9Ghz / 5Ghz
802.11a/b/g Outdoor AP/Router/Hotspot Controller |
| Description |
Reliawave™
RWA 3000 Outdoor AP/Router/Hotspot Controller |
| Ethernet
Connection |
IEEE
802.3 10/100BaseT (RJ-45) |
| Standard |
IEEE
802.11a (Wireless LAN)
IEEE 802.11g (Wireless LAN)
IEEE 802.11b (Wireless LAN)
IEEE 802.3 (Ethernet) |
| Network
Interface |
2x
10/100Mb Ethernet |
| Wireless
Interface |
1-2x
N Female Connectors |
| Memory |
128Mb |
| Flash |
32Mb |
| Operation
Modes |
Access
Point / WDS / Repeater / Client Bridge / Client Station / Ad hoc /
Wireless Router |
| Management |
Java
GUI and SSH Client |
| Enhanced
Lighting Protection |
POE
Bi-Directional, multi-strike Lightning Protecting |
| External
Power Jack (via
POE) |
18
VDC @1A (O.D - 5.5mm, I.D - 2.1mm) (POE and PS included) |
| Mounting |
Pole
mount via 2pc clamps (included) |
| Enclosure |
Water
Tight Aluminum Enclosure |
| AP
Weight |
5
lbs |
| Shipping
Weight |
7
lbs |
| Dimension |
8.75"
x 8.75" x 3" |
| Temperature
Range |
-35C
~ +65C |
| Relative
Humidity |
10%
to 90% non condensing |
| Manual |
|
| Firmware
NOS |
|
| |
Network
Characteristics |
Layer
2 |
| 802.1D
Bridging |
Layer
2 (Mac Address) Forwarding |
| 802.1Q
VLAN |
Vlan (802.1Q) Support |
| Network
QoS |
| QoS
- Bandwidth Management: |
| Committed
Information Rate (CIR) |
Peak
Information Rate (PIR) |
| Excess
Burst Size (EBS) |
Committed
Burst Size (CBS) |
Based
on: |
| Input/Output
Interface |
Source
IP/Subnet |
|
Source
Mac |
| Destination
IP/Subnet |
|
| Source
Port(s) |
Protocol
(FTP, ICMP, TCP, etc)
|
Application
(Peer to Peer, EDonkey, Kazza, FTP, etc)
|
|
Firewall
/ NAT / Packet Filtering |
| Input/Output
Interface |
Source
IP/Subnet |
|
Source
Mac |
| Destination
IP/Subnet |
|
| Source
Port(s) |
Protocol
(FTP, ICMP, TCP, etc)
|
| Connection
State (New, Established, etc) |
|
|
Layer
3 Routing
|
| Hotspot
Support |
| WAN/
LAN |
DHCP
|
|
QoS
- Bandwidth Management |
| Wireless |
UAM
Authentication |
| Radius
Client |
Users
Info |
| Walled
Garden |
Advertisement
Sites |
| Log in
Page Customization |
Radius
Statistics |
|
DHCP |
|
|
Routing
Protocol |
| Static
Routing |
RIPv1/RIPv2
|
|
|
|
| Network
QoS |
| QoS
- Bandwidth Management: |
| Committed
Information Rate (CIR) |
Peak
Information Rate (PIR) |
| Excess
Burst Size (EBS) |
Committed
Burst Size (CBS) |
Based
on: |
| Input/Output
Interface |
Source
IP/Subnet |
|
Source
Mac |
| Destination
IP/Subnet |
|
| Source
Port(s) |
Protocol
(FTP, ICMP, TCP, etc)
|
Application
(Peer to Peer, EDonkey, Kazza, FTP, etc)
|
|
Firewall
/ NAT / Packet Filtering |
| Input/Output
Interface |
Source
IP/Subnet |
|
Source
Mac |
| Destination
IP/Subnet |
|
| Source
Port(s) |
Protocol
(FTP, ICMP, TCP, etc)
|
| Connection
State (New, Established, etc) |
|
|
Monitoring / Management |
IP
Accounting |
Advanced
IP Accounting / Radius IP Accounting (MRTG) |
| Utilities |
Ping
/ Traceroute |
| Traffic
Monitoring |
History
(MRTG) and Real time (Java GUI) |
|
Services
|
|
|
Watchdog |
Software
and Hardware watchdog |
Remote
Upgrade |
Remote
Upgrade via Java GUI |
| Association
List |
| Alias
per Station |
Idle Time |
|
Link Parameters (Signal, Noise, Fade Margin, Tx Rate) |
| Command
set (Remove, Dissociate, Deny) |
|
Wireless
Security
|
| Authentication |
Radius
Authentication and IP Accounting
|
VPN
Tunneling |
|
|
Encryption |
| 64
& 128 Bit WEP |
Access
Control List (ACL) |
|
|
|
| |
|
Radio
Characteristics |
| Modulation |
802.11b
DSSS / 802.11a/g OFDM |
| Frequency
Range |
| FCC
Support Frequencies: |
| 2400Mhz-2482Mhz |
4900Mhz-4950Mhz |
|
|
| Special
modes in non FCC areas supported: |
| 2312Mhz-2732Mhz |
5000Mhz-6085Mhz |
|
| Special
Radio Features |
| Super
A/G |
Best Channel Selection |
| WMM
- Wireless QoS** |
Country
Code Selection |
| Mac Spoofing
|
Country
Code "ALL" |
| Hide SSID
|
DFS/TPC
Full Support |
| Repeater
- WPA1/2 |
5/10/20Mhz
Channel Size |
| **
Voice, Video, Best Effort, Background |
| |
|
| Antenna
Selection |
ACK Timeout
|
|
Tx Power |
Tx Rate |
| Hardware
Compression |
Hardware
Encryption |
| Bursting |
Fast Frames |
| PureG (108Mb) |
XR (eXtended
Range) |
| AR |
DFS-TPC
(802.11h) |
|
| Data
Rate |
| 11
Mbps: CCK |
802.11a
6-54Mb OFDM* |
|
802.11g
6-54Mb OFDM* |
| 2 Mbps:
QPSK |
4.9Ghz
6-54Mb OFDM* |
| 1 Mbps:
BSK |
|
| *RWA-3XXXAG
are rated at 20-25Mb real thought put |
|
| Channels |
| 2.4Ghz
(20Mhz) |
11
- US (FCC) 3 Non Over Lapping |
|
11
- US (FCC) 6 Non Over Lapping |
| 2.4Ghz
(5Mhz) |
11
- US (FCC) 11 Non Over Lapping |
|
5Ghz(20Mhz) |
13
- US (FCC) 13 Non Over Lapping |
|
23
- US (FCC) 23 Non Over Lapping |
| 5Ghz(5Mhz)
|
43
- US (FCC) 43 Non Over Lapping |
|
4.9Ghz(20Mhz) |
2
- US (FCC) 2 Non Over Lapping |
|
4
- US (FCC) 4 Non Over Lapping |
| 4.9Ghz(5Mhz)
|
7
- US (FCC) 7 Non Over Lapping |
|
| Range |
PtMP
up to 15+ miles / 25+ miles PtP with high gain antennas (a/g only) |
| Antenna
Connector |
N
Female Bulkhead |
| Approvals |
FCC
Part15, Section 15,247 |
| Radio
Power Characteristics |
| Atheros
400mW 802.11g |
| Transmit
Power |
Receiver
Sensitivity |
|
| 400mW
(26dBm) 1-24 Mbps |
54
Mbps -74 dBm |
11
Mbps -92 dBm |
| 251mW
(24dBm) 36 Mbps |
48
Mbps -77 dBm |
9
Mbps -93 dBm |
| 159mW
(22dbm) 48 Mbps |
36
Mbps -83 dBm |
6
Mbps -94 dBm |
| 126mW
(21dBm) 54 Mbps |
24
Mbps -86 dBm |
5.5
Mbps -95 dBm |
| |
18
Mbps -90 dBm |
2
Mbps -96 dBm |
| |
12
Mbps -91 dBm |
1
Mbps -97 dBm |
|
| Atheros
400mW 802.11a |
| Transmit
Power |
Receiver
Sensitivity |
|
| 400mW
(26dBm) 1-24 Mbps |
54
Mbps -74 dBm |
18
Mbps -90 dBm |
| 251mW
(24dBm) 36 Mbps |
48
Mbps -77 dBm |
12
Mbps -91 dBm |
| 159mW
(22dbm) 48 Mbps |
36
Mbps -83 dBm |
9
Mbps -93 dBm |
| 126mW
(21dBm) 54 Mbps |
24
Mbps -86 dBm |
6
Mbps -94 dBm |
|
| Atheros
500mW 4.9Ghz |
TBA |
| |
| Pricing
and Specs |
| DT-RWA-3440AA-LP-CO2 |
400mW
(5Ghz) 802.11a
|
400mW
(5Ghz) 802.11a
|
266Mhz |
|
| DT-RWA-3440AG-LP-CO2 |
400mW
(5Ghz) 802.11a
|
400mW
(2.4Ghz) 802.11g
|
266Mhz |
|
| DT-RWA-3440GG-LP-CO2 |
400mW
(2.4Ghz) 802.11g
|
400mW
(2.4Ghz) 802.11g |
266Mhz |
|
| DT-RWA-3400G-LP-CO2 |
400mW
(2.4Ghz) 802.11g
|
Empty
|
266Mhz |
|
| DT-RWA-3400A-LP-CO2 |
400mW
(5Ghz) 802.11a
|
Empty
|
266Mhz |
|
|
